The self-propelled lawn mower is a product line with a very large capacity. But it also cannot avoid unexpected failures or incidents. Therefore, in order to keep a self-propelled lawn mower running properly, we need to have an understanding of this product line. For those who do not know, let’s learn it through the steps below.
What errors do self-operated lawn mowers often encounter?
With a modern product like a self-operated lawn mower, unexpected incidents are not uncommon. Although the machine is purchased at a genuine store, unexpected problems are inevitable. To draw experience for everyone, let’s learn about this issue together.
1. The engine of the machine is short-circuited
This is a very serious error that a self-propelled lawn mower can encounter. It can cause a small explosion or at least completely damage your lawn mower.
This error usually comes from our poor maintenance of the machine. Leave the machine in a place with high humidity for a long time without operation. Causes moisture and air to corrode machine parts. From there, the spark plug’s ability to spark is affected and it can easily cause an explosion. The second reason may be due to the poor quality of the raw materials that make up the machine, with no clear origin.
Recommendation: 11 Lawn mower maintenance checklist & tips for gardeners
2. Charge the device incorrectly
This case is exclusive to PIM-powered lawnmowers. This product line takes time to recharge because they operate at high capacity and consumes a lot of energy. The question here is how and when do we need to refuel?
Be careful not to charge the device when it has just finished working. The device will very easily damage the battery and may cause a small explosion due to the battery overheating when it has just finished operation. Next, you need to remember to always let the device finish charging before unplugging. Otherwise, the life of the battery will be greatly reduced.
3. The chipset of the lawn mower is shorted
The machine’s chip will be at the center of all the actions the machine will do. Therefore, this is considered the most important part of the machine.
The condition of the chip is short-circuited, which will lead to the machine not working. The machine may stop completely or the parts may not work properly according to the process.
4. Unsuitable rugged terrain
Because this is an automatic lawn mower, not all-terrain can get the job done. When operating in rocky environments with many obstacles, the machine will be easily damaged. During the operation of the earth, sand or gravel will be shot into the engine causing collisions in the engine causing unnecessary damage.
How to keep a self-propelled lawn mower running properly
1. Understand how your mower works
When you first get the machine, make sure that you understand how it works as this can save a lot of time and money in the future. Just knowing what to do with your mower can mean that you will still be using the same mower a decade later. It should be remembered that parts need to be serviced and parts that are likely to wear need to be oiled. Take care that the small parts are kept safe when they are removed as it will make it impossible to use the mower.
Although the machine is designed to remove grass, the failure to remove grass from the undercarriage of the mower can cause a major problem. Once the grass has been removed, either by scraping the remains away or using a wire brush, anything that has managed to cling on is easy to remove with warm water.
Related post: How does a flail mower work? A full explain for newbies
2. Caring for the blade
The blade of a reel mower is the best ice of equipment you have when it comes to mowing the lawn and for this reason it is vitally important that it is well looked after and not allowed to rot or rust. A well-looked-after blade will cut the grass perfectly, but a blunt one is going to hack at the blades of grass and make a complete mess of the lawn. It will seem easiest to sharpen the reel mower blades with a vice file or metal file but this can be a mistake. To get them sharpened to the best standard, it will be best to take them to an expert as they will have both the ability and the equipment to ensure they are returned as good as new. This is not going to be an expensive job so there is no need to worry about being able to afford it.
Further reading: How to straighten lawn mower blades yourself?
3. Service your mower before use
Few things can be more annoying than getting the mower out to mow the lawn at the beginning of the summer and finding out that it either does not work at all or does not work well. Have an expert check it out and while this will incur a fee it is also likely to extend the life of the mower and prevent you from having to look for a new one after just a couple of years of use.
If you decide that you will carry out the work yourself, make sure that you have the proper equipment. Thick gloves need to be worn just in case there is contact made with the blades. In addition, it is likely that there could be small stones left in the grass clinging to the cutters and this is why you also should wear safety goggles.
4. Choose a reel more for smaller lawns
A reel mower will normally be used for just a small lawn as it will not be the easiest of machines to push if there is a large area to be dealt with. There are reel mowers that can be sat on and these will bring about the need for other forms of maintenance as there will be other parts that need to be looked after. So it is advisable to be cautious and more selective when picking the right equipment.
Related Posts: What is the best lawn mowers for 1 acre & 1/2 acres lot?
FAQs on keeping a self-propelled lawn mower running properly
1. What should be noted to help your self-propelled lawn mower run properly?
In order for the self-propelled lawn mower to run properly, we need to note a few small points as follows. It is necessary to read the machine’s warranty instructions carefully and follow them to keep the machine in the best condition when operating. Use the machine in accordance with its capabilities. If the machine is not used for a long time, it must be checked and maintained.
2. What is the indication of a self-propelled lawn mower that it is working properly?
One of the first signs is that the machine boots smoothly without interruption. During operation, the blade of the machine does not wobble and is always in a state of balance. When operating in difficult terrain, the engine of the machine does not get hot. It is important that when mowing the lawn the machine is not noisy.
Related post: How to tell if your lawn mower crankshaft is bent?
3. What parts of a self-propelled lawn mower directly affect the machine’s proper functioning?
Each product has different important parts that directly affect the product. Self-propelled lawn mowers are no exception. The parts of the machine that directly affect this can be mentioned: spark plugs, fuel tank, blade and engine.
Final thoughts
The self-propelled lawn mower is a machine suitable for many different yard sizes and can cut many types of grass. You can easily find this model of lawn mower in any major brand on the market.
However, any product will encounter errors during use, especially after a long time. Our article today to help you know how to keep your self-propelled lawn mower running properly. Understanding the features and using the machine properly is also a part of helping the machine to extend its operating life.
Take care of your garden with the best self-propelled lawn mower.
Hope you had a good time reading our article. Thank you for your reference!